Reviews : Flex-I-File Micro Finishing Cloth Abrasive Pads

Micro Finishing Cloth Abrasive Pads
Flex-I-File Micro Finishing Cloth Abrasive Pads
$10.39

Leave a Rating!

OR

Write a Review!

Write a Review

Sort

5-Star: 8 (11 ratings)
4-Star: 0 (0 ratings)
3-Star: 0 (0 ratings)
2-Star: 0 (1 ratings)
1-Star: 0 (0 ratings)

Reviews

Awesome finishing pads
I use these pads for wet sanding painted surfaces. They include 3200, 3600, 4000, 6000, 8000, and 12000 grit sanding pads. They make a great painted surface. The shine you get after properly wet sanding is amazing. I use them with Createx Auto Air paints. I coat with 3 coats of the base color. Then I do a complete series of wet sanding with the pads. and you could leave the paints like this if you want a satin finish, but I usually coat with 3 to 5 coats of alclad II clear gloss Lacquer. Then I lightly wet sand with the 4000, 6000, 8000 and 12000 grit pads. And then finsh off with Novus 2 and then Novus 1. You can see your face in the finish. These pads are absolutely wonderful.
Surprising results
I have never had to buff/sand out a paint screw up before so needless to say i was quite surprised that these pads did the trick. I had to respray the quarter panels on a model long after I had initially painted the body. I taped it off and sprayed, but sadly ended up with some obvious tape lines. And to think I was on the final assembly when this issue arose. I used these to smooth out the issue, retaped closer to the contour lines and resprayed, and now you can not tell the difference.
Great for polishing paint
I used this set for polishing Tamiya spray lacquer on a car model. The coarsest 3000 grit easily removed orange peel from the paint. After working through all the grits, by the time I got to the 12,000, the paint already had a soft sheen to it. Finished off with Novus #2 plastic polish, and the results are great. I will also be using this to polish resin castings.
when you need to fix a mark on your kit
this sandpaper, along with a good polish, will fix a lot of things on your kit. Sometimes you will get a kit and it has big scratches in it, or you mess up the paint with a run or orange skin, this will fix it
Sanding pads
I used these after my final wet coat of lacquer and after my third glosscote. Looked almost like glass, then I did a light coat of Meguire's Carnuba wax and it turned out a winner! Get these!
ICRO FINISHING ABRASIVE PADS
Very high quality. I would highly recommend this product to anyone who is looking for abrasive pads. easy to handle. Thay last longer than I exspectied.
Makes a shine
These sponges have help improve the shine on my car finish. Using these before applying compound polish has improved my models.
flx2000
By: hvyse
these do such a great job of smoothing out the new paint.