What you need to know before building this 720
The rating is not exactly where I want it...its somewhere between average and below average, on a 1-10 scale Id give it a 4 Been building models for about 35 years so I'm not new to this, Part fit is terrible, the wing half's don't line up with the pins, and if you get a match to where they line up parts of the leading edge and trailing edge, hang over The horizontal stabilizer parts ...oh man get the tape out they have one pin that attaches to the fuselage there is no real secure and positive fit of these parts,and then you have to line them both up equally The engine intakes, a very poor match to the body of the engine ,you will need putty, and lots of sanding Also make sure you get the paint upper and lower fuselage right on the money ,when you apply the decals, they are transparent and if your not lined up right you can see the imperfections if there are any All in all the model requires some additional work,could be a good kit if the manufacturer put more thought into it
